top of page

Red Devil 😈 Fan Group

Público·664 miembros

Wifi Hack Password Pass Txt



WiFi Hack Password Pass TXT: How to Crack Wi-Fi Passwords with Different Tools




Wi-Fi is one of the most common and convenient ways to access the internet. However, not all Wi-Fi networks are open and free. Some of them are protected by passwords or network security keys that prevent unauthorized users from connecting to them. If you want to hack Wi-Fi passwords and access these networks, you need some tools and techniques that can help you crack them.




wifi hack password pass txt



In this article, we will show you how to use different tools to hack Wi-Fi passwords and generate wifi hack password pass txt files that contain the passwords or keys of the networks you cracked. We will also explain the advantages and disadvantages of each tool and how to use them safely and legally.


WiFi Hack Password Pass TXT: How to Use Windows Commands to Get the Key




One of the easiest ways to hack Wi-Fi passwords is to use Windows commands. This method works only if you have previously connected to the Wi-Fi network and saved the password or key on your computer. Windows creates a profile of every Wi-Fi network you connect to and stores the password or key in it. If you can access these profiles, you can get the password or key of any network you have connected to before.


To use this method, you need to open a Windows Command Prompt with administrative privileges. You can do this by clicking the Start Menu, typing "cmd" (without quotes), right-clicking the Command Prompt entry, and selecting Run as administrator. This will open a black box with a prompt inside.


At the prompt, type the following command:


netsh wlan show profile


This will show you a list of all the Wi-Fi networks you have accessed and saved on your computer. These are called User Profiles.


Pick the network you want the password or key for, highlight it, and copy it. Then type the following command at the prompt, but replace the Xs with the network name you copied. You need quotation marks only if the network name has spaces in it.


netsh wlan show profile name="XXXXXXXX" key=clear


This will show you some information about the network profile, including its security settings. Look for the line that says Key Content. The word displayed next to it is the Wi-Fi password or key you are looking for.


You can copy this password or key and save it in a wifi hack password pass txt file for future reference.


WiFi Hack Password Pass TXT: How to Use Hydra to Brute-Force Wi-Fi Passwords




Another way to hack Wi-Fi passwords is to use Hydra, a brute-forcing tool that helps penetration testers and ethical hackers crack passwords of network services. Hydra can perform rapid dictionary attacks against more than 50 protocols, including telnet, FTP, HTTP, HTTPS, SMB, databases, and several other services.


Hydra was developed by a hacker group called The Hacker's Choice and was first released in 2000 as a proof of concept tool that demonstrated how to perform attacks on network logon services. Hydra is also a parallelized login cracker, which means it can have more than one connection in parallel. This reduces the time required to crack a password compared to sequential brute-forcing.


To use Hydra, you need to install it on your computer. Hydra comes pre-installed with Kali Linux and Parrot OS, two popular operating systems for penetration testing. If you are using one of them, you can start working with Hydra right away. On Ubuntu, you can use the apt package manager to install it:


apt install hydra


On Mac, you can find Hydra under Homebrew:


brew install hydra


If you are using Windows, we recommend using a virtual box and installing Linux. Windows is not a good choice if you want to be a professional penetration tester.


To work with Hydra, you need to know some common formats and options that Hydra provides for brute-forcing usernames and passwords. These include single username/password attacks, password spraying attacks, and dictionary attacks.


How to Perform a Single Username/Password Attack with Hydra




A single username/password attack is when you have a username and password that you expect a system to have and you want to test it. For example, if you have a user named "molly" with a password of "butterfly" hosted at 10.10.137.76, here is how you can use Hydra to test the credentials for SSH:


hydra -l molly -p butterfly 10.10.137.76 ssh


If it works, Hydra will show you something like this:


[22][ssh] host: 10.10.137.76 login: molly password: butterfly


This means that Hydra has found a valid username/password combination for SSH on 10.10.137.76.


How to Perform a Password Spraying Attack with Hydra




A password spraying attack is when you know a password that someone is using but you are not sure who it is. You can use Hydra to try this password against a list of usernames or hosts until you find a match.


For example, if you know that someone is using "butterfly" as their password but you don't know their username or host address, here is how you can use Hydra to try this password against a list of usernames stored in users.txt file:


hydra -L users.txt -p butterfly ssh


This will try "butterfly" as the password for every username in users.txt file against SSH service.


If you don't know their username but know their host address range (for example 10.10.x.x), here is how you can use Hydra to try this password against a list of hosts stored in hosts.txt file:


hydra -l molly -P /usr/share/wordlists/rockyou.txt 1010.137.76 ssh If this attack is successful,


we will see a similar result


to


the other two commands.


Hydra will highlight


the successful username/password combinations


in green for all


the matches.


How to Perform a Dictionary Attack with Hydra




A dictionary attack is when you have a list of possible passwords or keys that you want to try against a system. You can use Hydra to try these passwords or keys against a single username or a list of usernames until you find a match.


For example, if you have a list of passwords or keys stored in a file called passwords.txt, here is how you can use Hydra to try these passwords or keys against a user named "molly" hosted at 10.10.137.76 for SSH:


hydra -l molly -P passwords.txt 10.10.137.76 ssh


This will try every password or key in passwords.txt file against the user "molly" for SSH service.


If you have a list of usernames stored in a file called users.txt, here is how you can use Hydra to try these passwords or keys against every username in users.txt file for SSH:


hydra -L users.txt -P passwords.txt 10.10.137.76 ssh


This will try every password or key in passwords.txt file against every username in users.txt file for SSH service.


If this attack is successful, we will see a similar result to the other two commands. Hydra will highlight the successful username/password combinations in green for all the matches.


WiFi Hack Password Pass TXT: How to Use Aircrack-ng to Capture Wi-Fi Handshakes




A third way to hack Wi-Fi passwords is to use Aircrack-ng, a suite of tools that can capture and analyze Wi-Fi network traffic and perform various attacks on it. Aircrack-ng can crack WEP and WPA/WPA2 encryption methods using different techniques, such as replay attacks, deauthentication attacks, fake authentication attacks, and dictionary attacks.


Aircrack-ng consists of several tools, such as airmon-ng, airodump-ng, aireplay-ng, and aircrack-ng itself. Each tool has a specific function and can be used separately or together depending on the scenario.


To use Aircrack-ng, you need to install it on your computer. Aircrack-ng comes pre-installed with Kali Linux and Parrot OS, two popular operating systems for penetration testing. If you are using one of them, you can start working with Aircrack-ng right away. On Ubuntu, you can use the apt package manager to install it:


apt install aircrack-ng


On Mac, you can find Aircrack-ng under Homebrew:


brew install aircrack-ng


If you are using Windows, we recommend using a virtual box and installing Linux. Windows is not a good choice if you want to be a professional penetration tester.


To work with Aircrack-ng, you need to have a wireless network adapter that supports monitor mode and packet injection. Monitor mode allows your wireless network adapter to capture all the packets that are transmitted on a specific channel or frequency, regardless of whether they are addressed to your device or not. Packet injection allows your wireless network adapter to send packets that are not generated by your device, but by another tool or program.


Not all wireless network adapters support these features, so you need to check if yours does before using Aircrack-ng. You can use the following command to list all the wireless network adapters on your system and their capabilities:


iw list


This will show you some information about your wireless network adapters, such as their supported modes, frequencies, channels, encryption methods, etc. Look for the line that says monitor under Supported interface modes section. If it is present, it means your wireless network adapter supports monitor mode.


To check if your wireless network adapter supports packet injection, you can use the following command:


aireplay-ng --test wlan0


This will test your wireless network adapter (wlan0) for packet injection capabilities by sending some fake packets and checking if they are received by another device on the same channel. If it works, you will see something like this:


Injection is working!


This means your wireless network adapter supports packet injection.


If your wireless network adapter does not support monitor mode or packet injection, you need to get another one that does. You can find some recommendations here: https://www.aircrack-ng.org/doku.php?id=compatible_cards.


To use Aircrack-ng to capture Wi-Fi handshakes, you need to follow these steps:


  • Put your wireless network adapter in monitor mode using airmon-ng tool.



  • Capture Wi-Fi traffic using airodump-ng tool.



  • Deauthenticate a client from the target network using aireplay-ng tool.



  • Crack the captured handshake using aircrack-ng tool.



How to Put Your Wireless Network Adapter in Monitor Mode Using Airmon-Ng Tool




The first step is to put your wireless network adapter in monitor mode using airmon-ng tool. This will allow you to capture all the packets that are transmitted on a specific channel or frequency.


To do this, you need to run the following command:


airmon-ng start wlan0


This will put your wireless network adapter (wlan0) in monitor mode and create a new interface called wlan0mon that will be used for capturing packets.


How to Capture Wi-Fi Traffic Using Airodump-Ng Tool




The second step is to capture Wi-Fi traffic using airodump-ng tool. This will allow you to see all the Wi-Fi networks and clients that are active on a specific channel or frequency.


To do this, you need to run the following command:


airodump-ng wlan0mon


This will start capturing packets on all channels using wlan0mon interface and display some information about them on the screen.


WiFi Hack Password Pass TXT: Conclusion




In this article, we have shown you how to use different tools to hack Wi-Fi passwords and generate wifi hack password pass txt files that contain the passwords or keys of the networks you cracked. We have also explained the advantages and disadvantages of each tool and how to use them safely and legally.


However, we do not encourage you to use these tools for malicious purposes or without permission from the network owners. Hacking Wi-Fi passwords is illegal and unethical in most cases and can get you into serious trouble. You should only use these tools for educational purposes or for testing your own network security.


We hope you have learned something useful from this article and enjoyed reading it. If you have any questions or feedback, feel free to leave a comment below. Thank you for your attention and happy hacking! 6c859133af


Acerca de

Welcome to the group! You can connect with other members, ge...

Miembros

bottom of page